Energy & Petrochemical
Oil & gas assets fail not only from heat, pressure, and corrosive flow, but also from shock loads - bit chatter, water-hammer, and vibration.
Our novel innovations absorb impact without cracking and resist chemical attack, extending uptime, reducing shutdowns, and lowering total lifecycle costs.
Visual shown is a conceptual application demonstration
-
Blocks brine, sour gas (H₂S), and refinery acids from penetrating and degrading alloys. Reduces pitting, cracking, and leaks.
Abrasion
-
Shields against grinding damage from sand, slurry, and cuttings, extending drill head and pump component longevity.
Impact
& Erosion
-
Resists particle strikes, cavitation, and high-velocity fluid jets, preserving critical surfaces and extending service life.
Thermal Fatigue
-
Absorbs thermal shock and cycling, stopping crack propagation that weakens high-heat equipment.
Energy & Petrochemical Applications
Oil & Gas Applications
-
Well Casings
-
Drill Bits & Drill-Stem Components
-
Downhole Tools
-
Pipelines & Flowlines
-
Offshore Platforms
-
Valves & Pumps
-
Heat Exchangers & Separators
-
Storage Tanks & Pressure Vessels
Petrochemical & Refining Applications
-
Catalyst Cracking Units (FCC components)
-
Reactor Vessels & Internals
-
Piping Systems
-
Pump & Compressor Blades
-
Heat Exchanger Tubes
-
Distillation Columns
-
Flare Stacks & Burners
Get Involved
Engage with Mjolner today by requesting a sample.
Drill Bits & Drill-Stem Components : Bit life +50%, Wear resistance +35%
Pipelines & Flowlines : Corrosion life +60%, Erosion wear reduction +35%
Valves & Pumps : Component life +50%, Cavitation resistance +40%
Catalyst Cracking Units (FCC components) : Component life +40%, Oxidation resistance +35%
Reactor Vessels & Internals : Service life +45%, Stress-corrosion cracking reduction +30%
Pump & Compressor Blades : Erosion resistance +40%, Service life +30%
"Performance data represents estimated ROIs based on publicly available sources and benchmark studies. Actual results will vary on a case-by-case basis."
Application Methods - The Process
Our Tailored Coating Process
-
You Define the Mission: Tell us your component and performance requirements.
-
We Engineer & Sample: We customize material formulations & methods and deliver test samples.
-
You Validate: Run your application-specific tests; if needed, we refine the formulation.
-
We Finalize & Deliver: Lock in coating methods, process your parts, and share the performance data.
We are here to Precisely Tuned to Your Needs.
Thermal Spray
Cold Spray
PVD
HVOF/HVAF
